|
Your position: products > injection blow molding machine > 0.015-0.8 litre PE PP PS bottle machine |
||||||
|
Injection Blow Molding machine
|
|
|||||
|
MSZ series Injection Blow Hollow Molding Machine |
||||||
|
Application Field: Pharmacy, Chemical, Food, Cosmetic Industry |
||||||
|
|
||||||
| item | unit | MSZ25 | MSZ40 | MSZ60 | ||
| dia. of screw | mm | 35 | 45 | 50 | ||
| Max. theoretical capacity | cm3 | 123 | 227 | 324 | ||
| total power for cylinder-heating | KW | 6.5 | 10 | 11.85 | ||
| controller of electric-heating | qty | 3 | 3 | 3 | ||
| closing force of injection die | KN | 280 | 400 | 600 | ||
| opening force of injection die | KN | 70 | 68 | |||
| opening stroke | mm | 120 | 120 | 140 | ||
| closing force of blow die | KN | 30 | 78 | 89 | ||
| opening force of blow die | KN | 52 | 55 | |||
| opening stroke of blow die | mm | 120 | 120 | 140 | ||
| idle time | s | 4 | 8 | 8 | ||
| ejector stroke | mm | 200 | 200 | |||
| high of ejection frame | mm | 1200 | 1100 | |||
| lifting height of rotary table | mm | 60 | 70 | |||
| Max. plane size of die (LxW) | mm | 300x200 | 480x390 | 740x390 | ||
| Min. die thickness | mm | 180 | 240 | 280 | ||
| Motor power | KW | 15 | 22 | 30 | ||
| die-heating power | KW | 1.0 | 1.6 | 2.0 | ||
| pressure of hydraulic system | MPa | 14 | 14 | 14 | ||
| Max. working pressure of compressed | MPa | 1 | 1 | 1 | ||
| discharge rate of compressed air | m3/min | >0.3 | >0.5 | >0.8 | ||
| consumption of cooling water | m3/h | 3 | 3 | 5 | ||
| dimension of machine (LxWxH) | cm | 310x110x220 | 400x167x235 | 450x167x235 | ||
| machine weight | T | 2.5 | 6 | 6 | ||
| range of formability products | L | 0.015-0.8 | 0.015-0.8 | 0.015-0.8 | ||
| Height of formability products | mm | <165 | <200 | <200 | ||
| Dia. of formability products | mm | <100 | <100 | <120 | ||
| dis between core center & work table | mm | 120 | 140 | |||
| nozzle thrust stroke | T/mm | 3.1/200 | 5.65/300 | |||
| total power |
KW |
25 | 35 | 45 | ||
|
Cavity number of one mould corresponding to product volume (for reference) |
||||||
| Products volume/cavity number | MSZ25 | MSZ40 | MSZ60 | |||
| Average cycle time | 13 | 15 | 18 | |||
| 10-15 ml | 5 | 9 | 16 | |||
| 20ml | 5 | 9 | 16 | |||
| 40ml | 4 | 7 | 14 | |||
| 60ml | 3 | 6 | 12 | |||
| 100ml | 3 | 6 | 8 | |||
| 120ml | 2 | 5 | 7 | |||
| 200ml | 2 | 4 | 6 | |||
| 500ml | 1 | 2 | 3 | |||
| 800ml | 1 | 2 | ||||
| Production capacity (pcs/hour) | mould cavity x 60 x 60 / cycle time | |||||
|
Feature: Excellent mechanical strength, impact-resisting, and non-cracking Bottle mouth and the thread are of precise measurement, enabling 100% close match with the bottle cap. The weight of the product can be pre-set identically. The measurement and thickness of the product can meet the requirement of the design without any deviation. The surface of the bottle mouth and the body is of good luster and smoothness. No rough selvedge will occur at the mouth or bottom of the bottle products, which saves the cost of the raw material. On the bottom of the bottle there is no joint seam, and the strength is improved. The joint seam on the bottle body is smooth. Special computerized
control system is adopted and the stability of the whole machine is greatly
improved. |
||||||
